Contact us with LED enquiries today:

Full PC T8 LED Tube Light—J8 Series–125lm/w

The J8 series is available in four sizes and four colours.
600mm (2ft), 900mm, 1200mm (4ft), 1500mm (5ft)


Product Description

The J8 series is available in four sizes and four colours.
600mm (2ft), 900mm, 1200mm (4ft), 1500mm (5ft)


Colours we supply:

2700-3200K – WW – Warm white
4000-4500K – NW – Natural White
5000-5500K – DW – Daylight white
6000-6500K – CW – Cool white


About the J8 Series

The J8 series has many competitive advantages over other LED tubes. Whilst it remains visibly a conventional appearance it is made from Nano (PC) material that gives a 96% light transmission but also combines improved heat dissipation. The better light is provided by an increase with the beam angle to 300°. It is 125lm/w and offers a better light output than standard triphosphor tubes. Please consider this tube if that is an important factor.

The special Nano body is very strong and yet is only 0.4mm which helps provide a useful 30% less weight over other LED tubes. It has a rapid start, no UV or IR light radiation and works with a Magnetic ballast or direct to the mains supply AC85-265V 50-60Hz.

One extra advantage using this tube it provides flicker free operation when used under camera conditions.

Compare between Philips instantfit LED tube and Unifit LED Tube Series

Download this guide as PDF for easier reading.

Download PDF


Comparision LED tube

Installation of our Tube Lighting

The installation method will depend on the different fixture.


1) Traditional Light Fittings With Magnetic Ballast/Inductive Ballast:

It is not necessary to remove the magnetic ballast/inductive ballast, you only need to change the starter to be an LED starter.

Original Magnetic Ballast/Inductive Ballast:

Original Magnetic Ballast:Inductive Ballast-
New Correct LED T8 Tube Wiring:

New Correct LED T8 Tube Wiring-


2) Light Fittings With Electronic Ballast:

Electronic ballast are NOT compatible with LED T8 tube lighting, DO NOT install the LED T8 tube without moving/bypassing the electronic ballast as damage to the LED T8 tube light may occur.

Original Electronic Ballast:  

Electronic Ballast

New Correct LED T8 Tube Wiring:         

Correct LED T8 Tube Wiring

Contact us for more information

If you would like more information regarding this product, please get in touch with JLEDs via the form below or email us direct at sales@jleds.co.uk.


JLEDS Menu