Dimmable Flexi Strip without using LED controllers 5M 24V 6000K
Flexi strip is dimmable but this version requires no controllers. Simply turn the wall switch on and off to change the brightness levels from 100%, down to 50% and finally to 25%. 24VDC, 6W & 600lm per metre.
Dimmable LED Strip
Flexi strip is dimmable but this version has an advantage of not requiring a remote dimmable device to control it. Simply connect it to the mains switch and turn it on and off to reach three levels of brightness, 100%, 50% and finally 25%. Turn off and on again and it rests back to 100%.
- JL-L3-IP20-2835-10-96-6W-24V-6000K (Cool white)
- Sold on 5M rolls
- Wire the strip to an LED Driver with a 24V Output Voltage.
- LED strip has 96pcs SMD2835 per metre
- Power 6W 600lm per metre
- CRI Ra80
- Leave for 3-5 seconds and switch off/on and it will reduce to 50% brightness.
- Leave a further 3-5 seconds and switch off/on again and it will reduce down to 25% brightness.
- When turned off after use the strip will resume to the next dimming setting, upon next switch on, simply press off/on to obtain your desired brightness again, it’s that easy and very quick.
